HR CAP SHEET MEMBRANE

PRODUIT - Membrane de finition Haute Résistance (EN)

The HR CAP SHEET MEMBRANE is a self-adhesive membrane composed of elastomeric bitumen reinforced with a high resistance (HR) composite reinforcement. The exposed top surface of the membrane is protected with colored non-slip granules. HR CAP SHEET is used in single-ply and two-ply low slope roofs.

Benefits

  • Clean, fast and easy installation
  • Remains flexible at low temperatures
  • Anti-slip granulated surface
  • Effective and hard-wearing
  • High tensile strength composite reinforcement
  • No special tools required
  • Consistent thickness

Characteristics

Surface Granules
Underside Silicone release film
Structure Heavy duty composite
Thickness 3.8 mm (150 mils)
Minimum application temperature 10 °C (50 °F)
Limitation / restrictions Installation not recommended on a flat roof (a roof where the run-off goes to an inside drain)

Conditionement

BarcodesDescriptionsDimensionsBrute Area / NetWeight
6 23680 09101 6Brown1 m x 7 m (39 in x 22.9 ft)6.16 m² (66.3 ft²)32.5 kg (71.7 lb)
6 23680 09131 3Grey1 m x 7 m (39 in x 22.9 ft)6.16 m² (66.3 ft²)32.5 kg (71.7 lb)
6 23680 09141 2Black1 m x 7 m (39 in x 22.9 ft)6.16 m² (66.3 ft²)32.5 kg (71.7 lb)
6 23680 09151 1Green1 m x 7 m (39 in x 22.9 ft)6.16 m² (66.3 ft²)32.5 kg (71.7 lb)

Palletization

BarcodesUnits per boxeUnits per palletBoxes per palletWeight per pallet
6 23680 09101 612525796 kg (1,755 lb)
6 23680 09131 312525796 kg (1,755 lb)
6 23680 09141 212525796 kg (1,755 lb)
6 23680 09151 112525796 kg (1,755 lb)

Surface Preparation

Must be applied to a dry and clean surface. The substrate must previously be primed with EXTERIOR PRIMER.

Application

HR CAP SHEET is used in single-ply (with the LASTOBOND PRO HT-N WATERPROOFING MEMBRANE) and two-ply (with the BASIC WATERPROOFING MEMBRANE) roofing waterproofing systems on gentle slope roofs.

Needed to install this product

Complementary Products

© Resisto 2008 - 2017