LASTOBOND SANDED FINISH

PRODUIT - Lastobond protecteur avant-toit 20m (EN)

LASTOBOND SANDED FINISH is a 64-mil-thick, self-adhesive membrane composed of elastomeric bitumen with a glass mat reinforcement. The top surface is lightly sanded for your safety.

Benefits

  • Non-slip, sanded finish
  • Self-sealing membrane around nails and screws
  • Withstands exterior temperature fluctuations
  • Effective and hard-wearing
  • Clean and easy to install
  • Requires no special tools
  • No primer required

Characteristics

Surface Sanded
Underside Silicone release film
Structure Glass mat
Thickness 1.6 mm (63 mils)
Operating temperature -45 to 90 °C (-49 to 194 °F)
Minimum application temperature 5 °C (41 °F)
Limitation / restrictions Not recommended for installation on metal sheathing.

Conditionement

BarcodesDimensionsBrute Area / NetWeight
6 23680 00166 40.91 m x 20 m (36 in x 65 ft)18 m² (195 ft²)33 kg (73 lb)
6 23680 00167 10.91 m x 10 m (36 in x 33 ft)9 m² (99 ft²)33 kg (73 lb)

Palletization

BarcodesUnits per boxeUnits per palletBoxes per palletWeight per pallet
6 23680 00166 412525851 kg (1,875 lb)
6 23680 00167 113636684 kg (1,508 lb)

Surface Preparation

Although it is not mandatory, the use of a primer enhances the adhesion strength of self-adhesive membranes.

Application

LASTOBOND is used as a roofing eave protection for asphalt shingles and other roof coverings.

© Resisto 2008 - 2017