REDZONE PRO

REDZONE PRO_rouleau

REDZONE PRO is a self-adhesive through-wall membrane designed for light commercial buildings. It ensures air and water vapor waterproofing.
REDZONE PRO is composed of SBS modified bitumen and a tri-laminated woven polyethylene facer. The tri-laminated woven polyethylene is compatible with the use of sprayed polyurethane foam insulation. REDZONE PRO is also used as masonry flashing, transition membrane and waterproofing membrane around openings.

Benefits

  • Excellent adhesion to various substrates
  • Ideal for sprayed polyurethane foam insulation
  • Self-adhesive: easy, fast and economical to install
  • Self-sealing membrane ensuring continuous waterproofing

Characteristics

Surface Tri-laminated woven polyethylene
Underface Silicone release film
Thickness 1 mm (40 mil)
Minimum application temperature -10 °C (14 °F)
Service temperature -45 to 90 °F (-49 to 194 °F)

Conditionement

BarcodesDimensionsBrute Area / NetWeight
6 23680 14005 991 cm x 22,9 m (3 ft x 75 ft)20.8 m² (225 ft²) / 19.7 m² (213 ft²)19.9 kg ( 45 lb)
6 23680 00054 445 cm x 22,9 m (18 in x 75 ft)10.3 m² (112.5 ft²)9.9 kg (22.5 lb)
6 23680 00055 130 cm x 22,9 m (12 in x 75 ft)6.9 m² (75 ft²)6.6 kg (15 lb)
6 23680 00056 823 cm x 22,9 m (9 in x 75 ft)5.2 m² (56.3 ft²)4.9 kg (11.3 lb)
6 23680 00057 515 cm x 22,9 m (6 in x 75 ft)3.4 m² (37.5 ft²)3.3 kg ( 7.5 lb)
6 23680 00058 210 cm x 22,9 m (4 in x 75 ft)2.3 m² (25 ft²)2.2 kg (5 lb)

Palletization

BarcodesUnits per boxeUnits per palletBoxes per palletWeight per pallet
6 23680 14005 913636744 kg (1675 lb)
6 23680 00054 424824499 kg (1135 lb)
6 23680 00055 137224499 kg (1135 lb)
6 23680 00056 849624499 kg (1135 lb)
6 23680 00057 5614424499 kg (1135 lb)
6 23680 00058 2921624499 kg (1135 lb)

Surface Preparation

Using RESISTO H20 PRIMER or RESISTO EXTERIOR PRIMER is required before the installation of REDZONE PRO membrane. The substrate should be clean, sound, free of excess water and loose materials, grease and any contaminants, which may compromise the performance of the product.

Application

REDZONE PRO membrane must be adhered to support by peelling off the silicone release paper.
All membrane overlaps must be a minimum of 50 mm (2 in).
Once installed, a pressure must be applied over the whole surface using a hard roller to ensure a perfect adhesion.
REDZONE PRO could be applied over a caulking bead such as polyurethane or butyl provided they are fully cured. It is recommended however to test it and ensure their compatibility prior to full application of the membrane.
Polyurethane foam can be sprayed directly onto REDZONE PRO. However, membrane should be mechanically

Needed to install this product

© Resisto 2008 - 2017