FOUNDATION COATING

PRODUIT – Resistoseal enduit à fondation 18.9L (EN)

RESISTOSEAL FOUNDATION COATING is composed of bitumen and fast-evaporating solvent. It is used for the damproofing for foundation walls, footings, retaining walls, wing walls, abutments and culverts.

Benefits

  • Ideal for protecting masonry or concrete structures and to prevent moisture absorption and infiltration

Characteristics

Operating temperature Up to 70 °C (158 °F)
Minimum application temperature Maximum: 35 °C (95 °F)
Life Up to 24 months in the original sealed container, protected from moisture
Limitation / restrictions You must ensure that the RESISTOSEAL FOUNDATION COATING is dry to the touch before filling work.
At low temperatures, prepare the product at a temperature above 10 °C before use.
Do not apply to wet or frosted surfaces.
Storage Up to 24 months in the original sealed container, protected from moisture

Conditionement

BarcodesContainers / FormatsCovering power
6 23680 53060 73.78 l (1 gal)0.5 to 0.7 l/m² (1.2 to 1.7 gal/100 ft²)
6 23680 53061 418.9 l (5 gal)0.5 to 0.7 l/m² (1.2 to 1.7 gal/100 ft²)

Palletization

BarcodesUnits per boxeUnits per palletBoxes per pallet
6 23680 53060 7215075
6 23680 53061 413636

Surface Preparation

Surfaces must be dry and free of oil, grease, dirt and loose particles.
Concrete surfaces must be sound and free of cracks or other irregularities. Avoid applying the FOUNDATION COATING over damp or frost-covered surfaces. Use one of the RESISTOSEAL PLASTIC CEMENTS to fill irregularities at form ties prior to applying RESISTOSEAL FOUNDATION COATING. RESISTOSEAL FOUNDATION COATING must be dry to the touch before filling work.

Complementary Products

© Resisto 2008 - 2017