Select Mod G2 SAS Base

Default image produit

The Resisto Select Mod G2 SAS Base is a SBS modified, fiberglass reinforced base sheet. The Resisto Select Mod G2 SAS Base is manufactured to be a self-adhered membrane. The Resisto Select Mod G2 SAS Base is manufactured with a sanded surface on the topside, and a release film on the underside.

Benefits

  • Clean, fast and easy installation
  • High tensile strength reinforcement
  • Remains flexible at low temperatures
  • Consistent thickness
  • Can be used on low slope and flat roof
  • Cost effective for retrofit and new construction

Characteristics

Thickness 1.7 mm (68 mil)
Minimum application temperature 4.5°C (40°F)

Conditionement

BarcodesDimensionsBrute Area / NetWeight 
8 86442 08107 0 1 m x 18.6 m (39 in x 61 ft)19 m² (200 ft²)35 kg (77 lb)
 

Palletization

BarcodesUnits per palletWeight per pallet 
8 86442 08107 0 25898 kg (1980 lb)
 

Application

The Resisto Select Mod G2 SAS Base sheet is used as a base layer in a multi-ply membrane roof system. The self-adhered underside may be applied to a properly prepared (clean, dry, and/or primed) substrate. The sanded topside is intended to receive hot applied or cold applied adhesives for an inner ply or cap ply membrane. The self-adhesive seams are matted together and sealed using applied pressure. End laps and “T” joints are
sealed using hot-air welding techniques.

© Resisto 2008 - 2017