
BASE SHEET MEMBRANE
BASE SHEET MEMBRANE is a 2.5 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen with a glass mat reinforcement. The surface is sanded and the underface is a silicone split-back release film. Product sold in stores under certain conditions. Consult a RESISTO representative to know the details.
Benefits
- Glass mat providing excellent dimensional stability
Tests and certifications




Properties
Function
Waterproofing
Product Roles
- Flashing Membranes
- Roofing Underlayments
Building Component
Roofs
Technology
SBS modified bitumen
Characteristics
Types of Slope
- Outside low slope
- Outside very low slope
- Inside slope
Type of covering
SBS modified bitumen membranes
Substrates
- Plywood
- OSB
- Wood
- Steel deck
Surface
Sand
Underface
Silicone release film
Reinforcement
Glass mat
Application
Self-adhesive
Thickness
2.5 mm (98 mils)
UV exposure
Cover as soon as possible
Instructions
Storage instructions
Rolls should be stored upright, tape side up, protected from weather damage and UV rays. If the products are stored outdoors, cover them with an opaque protective cover after removing the delivery packaging. Can withstand freezing but must be reactivated to at least 10 ° C (50 °F) before installation.
Minimum application temperature
0 °C (32 °F)
Tools required
- Knife
- Tape measure
- Smoothing roller
Surface Preparation
The substrate must be clean, dry, and free of dust, grease or other contaminants.
Restrictions
It is not recommended to use a product containing bitumen directly on softwood boards softwood or of flexible polyvinyl chloride.
Previous identity
Conditioning
Products
Product code
Width
Length
Gross area
Net area
Weight
FLASH STICK BASE SHEET MEMBRANE
Product code
00315
Width
1 m (39 in)
Length
15 m (49 ft)
Gross area
15.00 m² (159.3 ft²)
Net area
13.3 m² (141 pi²)
Weight
43.44 kg (95.77 lb)
Palletization
Products
Barcodes
Product code
Units per skid
FLASH STICK BASE SHEET MEMBRANE
Barcodes
6 23680 00315 6
Product code
00315
Units per skid
25