ELASTOCOL STICK is a primer designed to enhance the adhesion of self-adhesive membranes on various surfaces. It is composed of SBS synthetic rubbers, adhesive-enhancing resins and volatile solvents. It is also suitable to prime non-porous surfaces, such as concrete, fibre cement, metal, and wood. Product sold in stores under certain conditions. Consult a RESISTO representative to know the details.
- Cold application
- Single component (ready to use)
Tests and certifications
- Adhesion-enhancing resins
- SBS synthetic rubbers
- Volatile solvents
Types of Slope
Any types of slopes
- Treated wood
- Paint brush applied
Cover as soon as it is dry
Service life (Storage)
Store in its original, closed packaging, in a cool, well-ventilated area with a temperature between -10 °C and 40 °C (14 °F and 104°F). Can withstand freezing.
Minimum application temperature
-10 °C (14 °F)
- Paint brush
The substrate must be clean, dry, and free of dust, grease or other contaminants.
Keep out of the reach of children. Properly close the container after each use. Keep out of the sun and away from ignition sources. During use, keep away from ignition sources. Do not smoke. After application, keep away from flames until the solvent has evaporated. Harmful if swallowed, inhaled, or in contact with skin. Store in a closed room, well ventilated by forced ventilation if necessary, and provide supervision from outside. Do not pour residues in drains.
The membranes should be installed 4 hours after the application. Do not apply onto polystyrene surfaces.
Tools can be cleaned with solvents such as mineral spirits, Varsol, and xylene
19 L (5 gal)
47.5 to 105 m² (511 to 1,130 ft²)
16.3 kg (36 lb)
Units per skid
6 23680 37746 2
Units per skid