FOUNDATION WATERPROOFING MEMBRANE
The BELOW-GRADE WATERPROOFING MEMBRANE is a self-adhering waterproofing membrane composed of SBS modified bitumen and a trilaminate woven polyethylene facer. The surface provides 100% protection from UV radiation. A silicone release film protects the self-adhesive underface. The BELOW-GRADE WATERPROOFING MEMBRANE is used to waterproof foundation walls which have previously been primed with RESISTO EXTERIOR PRIMER or H2O PRIMER.
Benefits
- Superior adhesion
- Consistent thickness
- UV resistant (90-day exposure)
- Tear-resistant
- Effective and hard-wearing
- Easy installation
- No special tools required
Tests and certifications
Properties
Function
Waterproofing
Product Roles
Waterproofing Membranes
Building Component
Foundations
Technology
SBS modified bitumen
Characteristics
Substrates
- Treated wood
- Concrete
- PWF
- Masonry blocks
Surface
Trilaminate woven polyethylene
Underface
Silicone release film
Application
Self-adhesive
Service temperature
-40 °C to 60 °C (-40 ° to 140 °F)
Thickness
1.5 mm (60 mils)
UV exposure
90 days
Instructions
Storage instructions
Rolls should be stored upright, tape side up, protected from weather damage and UV rays. If the products are stored outdoors, cover them with an opaque protective cover after removing the delivery packaging. Can withstand freezing but must be reactivated to at least 10 ° C (50 °F) before installation.
Minimum application temperature
10 °C (50 °F)
Tools required
- Knife
- Tape measure
- Smoothing roller
Surface Preparation
The substrate must be clean, dry, and free of dust, grease or other contaminants.
Restrictions
It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride. When waterproofing foundation, backfill should be free of debris to ensure proper water drainage towards the drain. It is the sole responsibility of the user to ensure that the products are installed according to the applicable Building Codes and the requirements of local authorities.
Previous identity
Conditioning
Products
Product code
Width
Length
Gross area
Net area
Weight
Weight per skid
BELOW-GRADE WATERPROOFING MEMBRANE
Product code
15244
Width
1 m (39 in)
Length
20 m (65.6 ft)
Gross area
20.00 m² (213.2 ft²)
Net area
18.0 m² (191 pi²)
Weight
29 kg (64 lb)
Weight per skid
725 kg (1,598 lb)
Without box
Palletization
Products
Barcodes
Product code
Units per box
Units per skid
Boxes per skid
Weight per skid
BELOW-GRADE WATERPROOFING MEMBRANE
Barcodes
6 23680 15244 1
Product code
15244
Units per box
1
Units per skid
25
Boxes per skid
25
Weight per skid
725 kg (1,598 lb)
