ICF FOUNDATION MEMBRANE

The ICF FOUNDATIONS MEMBRANE is a selfadhesive membrane dedicated to the waterproofing of insulated concrete form (ICF) foundations. It is composed of 1 mm thick SBS-modified bitumen and a trilaminate woven polyethylene. The underface is composed of a silicone film easily detachable


Benefits

  • Self-adhesive formulation specially adapted for ICFs
  • No primer required on polystyrene surfaces
  • Superior adhesion

Tests and certifications

ISO-9001
ISO-14001
CCMC-13630
CCMC-14080

Function

Waterproofing

Product Roles

  • Insulated Concrete Forms
  • Waterproofing Membranes

Building Component

Foundations

Technology

SBS modified bitumen

Substrates

  • Concrete
  • PWF
  • ICF

Surface

Trilaminate woven polyethylene

Underface

Silicone release film

Application

Self-adhesive

Service temperature

-45 °C to 70 °C (-49 °F to 158 °F)

Thickness

1 mm (40 mils)

UV exposure

90 days

Storage instructions

Rolls should be stored upright, tape side up, protected from weather damage and UV rays. If the products are stored outdoors, cover them with an opaque protective cover after removing the delivery packaging.

Minimum application temperature

Summer Grade: 10 °C (50 °F) Winter grade: -10 °C (14 °F)

Tools required

  • Knife
  • Tape measure
  • Smoothing roller

Surface Preparation

ICF FOUNDATION MEMBRANE can generally be installed without primer over clean, dry ICF surfaces requiring damp proofing. If ICF FOUNDATION MEMBRANE is intended to be used in areas requiring waterproofing or if specific conditions call for the use of primer, such as high concentration of dust, use H2O PRIMER , which is a water-based primer. Solvent-based primers may damage the polystyrene and therefore must not be used.

Restrictions

It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride. When waterproofing foundation, backfill should be free of debris to ensure proper water drainage towards the drain. It is the sole responsibility of the user to ensure that the products are installed according to the applicable Building Codes and the requirements of local authorities.

previous-photo-0 previous-photo-0
FOUNDATION/ICF WATERPROOFING MEMBRANE

Products

Product code

Gross area

Length

Net area

Packaging

Weight

Width

BELOW-GRADE ICF WATERPROOFING MEMBRANE - Low temp

Product code

10044

Gross area

18.6 m² (200 ft²)

Length

20.4 m (67 ft)

Net area

16.3 m² (176.3 ft²)

Packaging

Without box

Weight

17.56 kg (38.7 lb)

Width

91 cm (36 in)

BELOW-GRADE ICF WATERPROOFING MEMBRANE - Low temp

Product code

10049

Gross area

18.6 m² (200 ft²)

Length

20.4 m (67 ft)

Net area

16.3 m² (176.3 ft²)

Packaging

WIth box

Weight

17.56 kg (38.7 lb)

Width

91 cm (36 in)

ICF WATERPROOFING MEMBRANE

Product code

10045

Gross area

18.6 m² (200 ft²)

Length

20.4 m (67 ft)

Net area

16.3 m² (176.3 ft²)

Packaging

Without box

Weight

17.56 kg (38.7 lb)

Width

91 cm (36 in)

BELOW-GRADE ICF WATERPROOFING MEMBRANE

Product code

10046

Gross area

18.6 m² (200 ft²)

Length

20.4 m (67 ft)

Net area

16.3 m² (176.3 ft²)

Packaging

WIth box

Weight

17.56 kg (38.7 lb)

Width

91 cm (36 in)

Products

Product code

Barcodes

Units per skid

BELOW-GRADE ICF WATERPROOFING MEMBRANE - Low temp

Product code

10044

Barcodes

6 23680 10044 2

Units per skid

36

BELOW-GRADE ICF WATERPROOFING MEMBRANE - Low temp

Product code

10049

Barcodes

6 23680 10049 7

Units per skid

25

ICF WATERPROOFING MEMBRANE

Product code

10045

Barcodes

6 23680 92360 7

Units per skid

36

BELOW-GRADE ICF WATERPROOFING MEMBRANE

Product code

10046

Barcodes

6 23680 10046 6

Units per skid

25