REPAIR AND SEAL TAPE - ALUMINUM FINISH

REPAIR AND SEAL TAPE is a versatile, self adhesive 60 mil membrane, consisting of a rubberized asphalt compound, covered by a patented Aluminum Foil reinforced with a polyester film. The adhesive compound is protected, until use, by a silicone release film.


Benefits

  • Waterproof and self-sealing
  • UV resistant
  • Cold applied without use of flames

Function

  • Waterproofing
  • Accessory Products

Product Roles

  • Accessory
  • Waterproofing Membranes

Building Component

Roofs

Technology

SBS modified bitumen

Substrates

  • Plywood
  • OSB
  • Wood
  • Metal
  • Concrete

Underface

Silicone release film

Service temperature

-40°C to 80°C (-40°F to 176°F)

Thickness

1,5 mm (60 mils)

Storage instructions

Rolls should be stored upright at all times and at temperatures that do not exceed 52 °C (125 °F). REPAIR AND SEAL TAPE retains its quality characteristics for a long time, however, recommended shelf life is 12 months. The product can be stored at temperatures below 0 °C (32 °F), but must be conditioned 24 hours at 10 °C (50 °F) or higher before use.

Minimum application temperature

Product should not be applied when the surface temperature and ambient temperature is lower than 10 °C (50 °F).

Tools required

  • Knife
  • Tape measure
  • Smoothing roller

Surface Preparation

The substrate must be clean, dry and free of dust, grease or other contaminants.

Restrictions

REPAIR AND SEAL TAPE is a non-hazardous material when used in accordance with manufacturer’s recommendations. Wearing gloves is recommended during installation. Improper handling may cause cuts. REPAIR AND SEAL TAPE can be slippery, use caution when standing or walking on the product. REPAIR AND SEAL TAPE is not intended to withstand foot traffi c, damaged product should be replaced by the installer. Aluminum is a reflective material, protect skin and eyes from sunburn and brightness. REPAIR AND SEAL TAPE is incompatible with some PVC types, product made from EPDM and sealants containing polysulfide.

Products

Product code

Width

Length

Thickness

Gross area

Weight

REPAIR AND SEAL TAPE - ALUMINUM FINISH

Product code

24615

Width

15 cm (6 in)

Length

7.6 m (25 ft)

Thickness

1.5 mm (60 mils)

Gross area

1.16 m² (12,5 ft²)

Weight

1.733 kg (3.82 lb)

Products

Product code

Units per box

Units per skid

Barcodes

REPAIR AND SEAL TAPE - ALUMINUM FINISH

Product code

24615

Units per box

8

Units per skid

432

Barcodes

6 23680 91307 3