SYNTHETIC ROOFING UNDERLAYMENT RESISTOR SF

RESISTOR SF is a lightweight, non-slip synthetic membrane composed of a non-woven polyolefin surface and a polymer reinforced woven polyolefin underside. It can be used as a complement to the installation of an eave protector.


Benefits

  • Anti-slip
  • Much lighter and stronger than felt paper
  • Tensile strength and tear resistance

Tests and certifications

ISO-9001
ISO-14001

Function

Waterproofing

Product Roles

  • Roofing Underlayments
  • Synthetic Underlayments

Building Component

Roofs

Technology

Polyolefin

Types of Slope

Outside steep slope

Type of covering

  • Asphalt shingles
  • Metal roofing

Substrates

  • Plywood
  • OSB
  • Wood

Surface

Polyolefin

Application

Nailed down

Service temperature

-40 °C to 116 °C (-40 °F to 240 °F)

Thickness

0.25 mm (10 mils)

UV exposure

90 days

Storage instructions

Rolls should be stored upright, tape side up, protected from weather damage and UV rays. If the products are stored outdoors, cover them with an opaque protective cover after removing the delivery packaging.

Minimum application temperature

Can be used in any temperature

Maximum application temperature

Can be used in any temperature

Tools required

  • Knife
  • Tape measure
  • Hammer
  • Ring roofing nails 25 mm (1 in)

Surface Preparation

The substrate must be clean, dry, free of dust, and smooth with all the rough edges and asperities repaired or removed, e.g., nails and staples.

Restrictions

Pneumatic staple guns are not recommended.

previous-photo-0
RESISTOR SF

Products

Product code

Width

Length

Gross area

Net area

Weight

SYNTHETIC ROOFING UNDERLAYMENT RESISTOR SF

Product code

22353

Width

1.07 m (42 in)

Length

87 m (286 ft)

Gross area

93.27 m² (1,001.0 ft²)

Net area

84.3 m² (904 pi²)

Weight

9.53 kg (21 lb)

Without box

Products

Barcodes

Product code

Units per skid

SYNTHETIC ROOFING UNDERLAYMENT RESISTOR SF

Barcodes

6 23680 22353 0

Product code

22353

Units per skid

56