ALUMINUM ROOF COATING

The ALUMINUM ROOF COATING is a thick, homogeneous coating made of elastomeric bitumen, volatile solvents, and reflective aluminum pigments. It restores and protects metal surfaces from corrosion: roofs, cladding, storage tanks, water ducts, etc. This product can also be used to revitalize aging traditional asphalt roofs.


Benefits

  • Allows to reduce surface temperature by protecting it from UV rays
  • Restores and protects metal surfaces
  • Can be applied on different surfaces, such as asphalt roofing

Tests and certifications

ISO-9001
ISO-14001

Function

Waterproofing

Product Roles

Coatings

Building Component

Roofs

Technology

SBS modified bitumen

Substrates

  • Metal
  • Asphalt roof

Application

  • Paint brush applied
  • Rolled
  • Sprayed

Service temperature

-40 °C to 80 °C (-40 °F to 176 °F)

Service life (Storage)

3 years

Storage instructions

Store in its original, closed packaging, in a cool, well-ventilated area with a temperature up to 40 °C (104°F). Can withstand freezing.

Minimum application temperature

0 °C (32 °F)

Tools required

  • Paint brush
  • Roller
  • Sprayer

Surface Preparation

The substrate must be clean, dry, and free of dust, grease or other contaminants.

Warnings

Keep out of the reach of children. Properly close the container after each use. Store in a closed room, well ventilated by forced ventilation if necessary, and provide supervision from outside. Harmful if swallowed, inhaled, or in contact with skin. During use, keep away from ignition sources. Do not smoke. After application, keep away from flames until the solvent has evaporated. Do not pour residues in drains.

Restrictions

If the surface being treated is cracked or has holes, clean the surface, apply EXTERIOR PRIMER and repair with an ALUMINUM WATERPROOFING MEMBRANE. The coating may be applied to a previously coated substrate. However, it is not advisable to apply a paint coating. Do not apply in wet weather, when there is risk of condensation. It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride.

Cleaning

Clean wet tools with water. When dry, clean with petroleum solvents, such as mineral spirits, Varsol, and xylene

previous-photo-0 previous-photo-0
ANTICORROSION SEALANT / ROOF ALUMINUM COATING

Products

Product code

Packaging

Coverage

Weight

Weight per skid

ROOF ALUMINUM COATING

Product code

34015

Packaging

18 l (4.8 gal)

Coverage

36 to 90 m² (384 to 969 ft²)

Weight

23.54 kg (51.91 lb)

Weight per skid

1,105 kg (2,436 lb)

Without box

ROOF ALUMINUM COATING

Product code

34005

Packaging

3 l (0.8 gal)

Coverage

6 to 15 m² (64 to 162 ft²)

Weight

3.97 kg (8.75 lb)

Weight per skid

638 kg (1,405 lb)

With box

Products

Barcodes

Product code

Units per box

Units per skid

Boxes per skid

Weight per skid

ROOF ALUMINUM COATING

Barcodes

6 23680 34015 2

Product code

34015

Units per box

Units per skid

36

Boxes per skid

Weight per skid

1,105 kg (2,436 lb)

ROOF ALUMINUM COATING

Barcodes

6 23680 34005 3

Product code

34005

Units per box

2

Units per skid

150

Boxes per skid

75

Weight per skid

638 kg (1,405 lb)