PRODUIT - Resistoboard (FR-EN)

RESISTOBOARD Semi-rigid board is composed of a mineral fortified asphaltic core formed between two saturated fiberglass felts. This board is designed to be used as a substrate material in low-slope roofing. It can be installed over wood, rigid insulation or as a recover sheetover an existing roof surface, which is to be re-roofed.


  • Compatible with most bitumen and built-up roofing systems
  • Easy to handle and install
  • Mold resistant
  • Puncture resistant
  • Hard-wearing
  • Can be cut easily with a knife


Thickness 6.4 mm (1/4 in)
3.2 mm (1/8 in)
Limitation / restrictions RESISTOBOARD must be quickly covered after its installation and not be left exposed.
Do not apply directly onto new wood planks.


BarcodesDimensionsBrute Area / NetWeight
n/a1.22 m x 1.52 m (4 ft x 5 ft)1.86 m² (20 ft²)0.86 kg/ft² (9.1 lb/m²)
6 23680 08420 91.22 m x 1.52 m (4 ft x 5 ft)1.86 m² (20 ft²)0.86 kg/ft² (4.2 lb/m²)


BarcodesUnits per palletBoxes per palletWeight per pallet
n/a60601,026 kg (2,262 lb)
6 23680 08420 950100804 kg (1,772 lb)


Substrate material in roofing systems or asphalt shingles
Protective board with any waterproofing foundation system

© Resisto 2008 - 2018