RESISTO’S ALL-WEATHER FLASHING TAPE is a self-adhesive membrane made of rubberized butyl which prevents air and water infiltration. It can be easily applied on wood, aluminum, polyethylene and PVC as well as air-barrier membranes and exterior fiberglass gypsum.
This is the perfect time to test and adopt our new all-weather flashing tape with the RESISTO REWARDS program.
By submitting your invoices on the RESISTO REWARDS platform.
Applicable on the following product codes: #22767, #22858, #22860 and #22859.
An irresistible offer!
Offer valid from April 1 to May 21, 2019.
Superior adhesion at temperatures ranging from 5 °F to 149 °F (-15 °C to 65 °C) without primer.
Excellent adhesion to most common construction materials, including PVC.
Self-sealing around nails, screws and clips.
Thin tape suitable for corners and siding of doors and windows.
Resistance to UV rays for 180 days.
Four formats available: 4 in (10 cm), 6 in (15 cm), 9 in (23 cm) and 12 in (30 cm).
Installation Recommended by RESISTO
Insert the ALL-WEATHER FLASHING TAPE corner guards on the weather barrier to prevent infiltration. Mechanically secure the ALL-WEATHER FLASHING TAPE corner guards.
Apply an ALL-WEATHER FLASHING TAPE strip on the lower part of the window and cover 2 to 3 in (5 to 7.5 cm) of the weather barrier.
Cut the membrane on each side of the opening and adhere it with a membrane roller.
Install a membrane strip from 2 to 3 in (5 to 7.5 in) on the weather barrier of the joist.
Install the metal flashing according to the building code.
Fold the weather barrier membrane in place. Cut 1 in (2.5 cm) of the weather barrier to clear the metal flashing.
Si oui, visitez notre site américain afin de découvrir les produits offerts au États-Unis
If yes, visit our American site to discover products available there.
Si oui, visitez notre site américain afin de découvrir les produits offerts aux États-Unis.